How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SuperDave Your Own Question
SuperDave
SuperDave, ASE Certified Technician
Category: Mazda
Satisfied Customers: 1491
Experience:  over 16 years experience
10552493
Type Your Mazda Question Here...
SuperDave is online now
A new question is answered every 9 seconds

How do I get the 6 wires out of the old connector and then

Customer Question

HI, how do I get the 6 wires out of the old connector and then reinstall them into the new connector that has the diode wires
Submitted: 1 year ago.
Category: Mazda
Expert:  SuperDave replied 1 year ago.

There is a special tool used to remove the wires from the old connector,but you can just cut the old connector with some wire cutters until you can pull the wires out.When you push the wires into the new connector they will lock in place.