How do i re-progam a key fob for a 2008 mazda 6 2.5 sport uk. Its keyless entry and other methods of programming dont work as the door master lock cannot be operated with the door open. It has had the battery disconected and wont recognise the fob. It will only start with the key out and in the ignition barrel.
Downloaded lots of advice about reprogramming but nothing works.It will be ok once its started but the next time you try in will fail and you have to remove the key and use it as a manualkey.
Hi, I’m a moderator for this topic and I wonder whether you’re still waiting for an answer. If you are, please let me know and I will do my best to find a Professional to assist you right away. If not, feel free to let me know and I will cancel this question for you. Thank you!
Yes still waiting for response.
Relist: Other.No reply.
do you have regular key fob and regular metal blade key or access card ?
This does not really help. It is keyless but the key can be removed from the fob as an emergenct start. The key slides into a slot which is where the ignition barrel should be. also you cannot operate the master door lock switch with the door opening. The ignition switch does not turn, its push button start.
This is a UK spec vehicle.
This is a uk spec vehicle. The door locks cannot be operated with the doors open as stated in your flow chart. It is a keyless entry but the key will slide out of the fob to use manually. The key is slid into a slot where the ignition barrel would be. This allows you to depress the clutch and press the start button starting the vehicle.