How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Mazda
Satisfied Customers: 17006
Experience:  ASE Master certified, 30 years experience. Auto troubleshooting, electrical , ABS, SRS, EFI system
2947720
Type Your Mazda Question Here...
Jerry is online now
A new question is answered every 9 seconds

How do i change the battery  remote for mazda6 2007?

Resolved Question:

how do i change the battery  remote for mazda6 2007?
Submitted: 5 years ago.
Category: Mazda
Expert:  Jerry replied 5 years ago.

Hello and welcome to Just answer.com, Super mechanic here. Please DON’T hit accept until you are completely satisfied with the answer. If you need any more on it just let me know. About your vehicle.

Card Key Battery Replacement [With Advanced Keyless System]

CARD KEY BATTERY REPLACEMENT [WITH ADVANCED KEYLESS SYSTEM]

Card Key Type


  1. Pull out the auxiliary key.

 


  1. Replace the cap using a flathead screwdriver, then rotate and remove the cap.

CAUTION: Do not turn the cap excessively. The cap may be damaged.


  1. Insert a flathead screwdriver into the crack and press the battery out.

 


  1. Insert the new battery (CR2025) with the positive pole (+) facing the (+) mark on the cap.

Battery specification Lithium CR2025 x 1

NOTE: The batteries will last about 1 years when used 10 times a day.

  1. Rotate and close the cap.

 


  1. Reinsert the auxiliary key.

 

 

 

Transmitter Battery Replacement [Keyless Entry System]

TRANSMITTER BATTERY REPLACEMENT [KEYLESS ENTRY SYSTEM]

Retractable Key Type


  1. Insert a small screwdriver into the slot and push the tab to remove the key from the transmitter.

 


  1. Insert a small screwdriver into the slot and gently pry open the transmitter.

 


  1. Remove the battery.
  2. Put in the new battery (CR1620) with the positive pole (+) facing clown.
  3. Align the front and back covers and snap the transmitter shut.

Battery specification Lithium CR1620 x 1

NOTE: The batteries will last about 2 years when used 10 times a day.


  1. Install the key to the transmitter.

 

 

TRANSMITTER ID CODE REGISTRATION [KEYLESS ENTRY SYSTEM]

 

 

 

graphic

 

 



NOTE: When programming the ID code into a keyless control module, verify that other transmitters are not being operated in the vicinity.

 

 

 

 

 

 

 

 

Jerry and 2 other Mazda Specialists are ready to help you

Related Mazda Questions