I have attached the pin out chart for the radio connector below
when will you be tackling this project?
I am in the process of doing this now. Have looked at the unit, diagram you sent doesn't appear to be exactly what I am looking at. I have a factgory installed 6cd changer with a radio and cassette player. Looking at the diagram and looking at the wires I don't see two of the grounds #2 and 11, plus there are other connections, I am sure some of these
are for the cassette player (which is not going to be used).
Below is a diagram of the plug I am looking at, hope is can be of some help.
G. Y.....xx P
x = wires (I think the top 8 wires are speakers)
. = open slots
G = back / green ground
P = OG/LG voltage
Y = Yellow / black
I will hook everything up the way I am interpreting it tomorrow.
So, did you get it hooked up?
Yes, I did get it hooked up. You schematic ws worth about half the price, not correct schematic.