How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Drew Your Own Question
Drew
Drew, Super Mazda Tech.
Category: Mazda
Satisfied Customers: 2518
Experience:  19 yrs. experience. Mazda Senior Certified Tech, with Ford, Linc. & Merc. experience. ASE L1 Advanced Certified Master Tech.
49548721
Type Your Mazda Question Here...
Drew is online now
A new question is answered every 9 seconds

Mazda 6 Is it possible to disable Automatic Door lock on Mazda

Customer Question

Is it possible to disable Automatic Door lock on Mazda 6? How?
Submitted: 5 years ago.
Category: Mazda
Expert:  Drew replied 5 years ago.

Welcome to Just Answer. My name is XXXXX XXXXX I will be glad to assist you.

 

 

Yes it can be disabled. Try this procedure and let me know if it is disabled.

 

If this procedure does not work, you will have to bring it to the Mazda dealer to change the setting of your auto lock.

Please let me know if you have any additional questions.

Thanks


Drew

 

 

The doors and the liftgate can be set to lock or unlock automatically by
by selecting any one of the functions from the following table and using
the drivers door-lock switch.

 

Repair Procedure

Function Number Function
________________________________________________________________________
1 The auto door-lock function is disabled.
------------------------------------------------------------------------
All doors and the liftgate lock automatically
2 when the vehicle speed reaches about 12 mph
or more.
------------------------------------------------------------------------
All doors and the liftgate lock automatically
when the vehicle speed reaches about 12 mph
3 or more. All the doors and the liftgate will
unlock whn the ignition is switched from "ON"
to "ACC" or "OFF".
------------------------------------------------------------------------
When the ignition is switched "ON" and the
4 shift lever is shifted from PARK to any
other gear posistion, all doors and the
liftgate lock automatically.
------------------------------------------------------------------------
When the ignition is switched "ON" and the
shift leveris shifted from PARK to any other
5 gear position, all the doors and the liftgate
lock automatically. When the shift lever is
shifted to Park while the ignition is ON all
doors and the liftgate unlock automatically.
______________________________________________________________________

1. Stop the vehicle and close all the doors.
2. Switch the ignition ON.
3. Press and hold the lock side of the drivers door-lock switch within
10 seconds of switching the ignition ON, A "BEEP" will be heard about
8 seconds afterwards.
4. Refering to the table above, determine the function number for the
desired setting and press the unlock side of the drivers door-lock
switch in the amount of the selected function number.
5. Three seconds after the function setting has been changed, a BEEP
will BEEP in the amount of the selected number.

NOTE: It has been found that there is no BEEP when pressing the lock
side of the switch for 2010 CX-7, but there is a confirmation beep
after.
*On vehicles equipped with auto door lock system customization
function. 2010 Mazda6 vehicles with BCM GS3L-67-560 and
GS3M-67-560 are
not equipped with this feature.
** Functions 4 and 5 are not available on Manual Transmission
Vehicles.

Drew and other Mazda Specialists are ready to help you