How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 15730
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a navionics chip in a c129w and can not get the

Customer Question

I have a navionics chip in a c129w and can not get the sounding displayed despite turning them on on the cartography
Submitted: 6 months ago.
Category: Marine Electronics
Expert:  Pete replied 6 months ago.

Hi John,

If the sounding is not showing then there may be a problem with the transducer or the wiring to it.

First, check all cable connections are good, and check for any damage in the cabling.

If that doesn't work, try hooking up a different chartplotter to your transducer to test it (you could borrow one from a friend)

If it still doesn't work then it is likely that the transducer has failed, and it will need to be replaced.

Related Marine Electronics Questions