How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 16329
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a honda 225 hp 2004 which gives me the code 24 change

Customer Question

i have a honda 225 hp 2004 which gives me the code 24 change the 3 temperature sensor and tracking alarm , turns on after 5 minutes of start i make the volt test 5 volt i need is posible do yuo help me thank you
Submitted: 8 months ago.
Category: Marine Electronics
Expert:  Pete replied 8 months ago.
Hi there
Expert:  Pete replied 8 months ago.
Code 24 indicates "overheat sensor 1".If you are still getting this error code when the engine is cold, and after changing the sensors, then something is wrong with the network connection between the engine and your system.Check for any loose or damaged wiring. Ensure all connections are securely attached - disconnect, check and reattach each connection.Let me know how you get on...Pete.

Related Marine Electronics Questions