How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Russell H. Your Own Question
Russell H.
Russell H., Service Tech
Category: Marine Electronics
Satisfied Customers: 9547
Experience:  8+ years of professional experience
13568747
Type Your Marine Electronics Question Here...
Russell H. is online now
A new question is answered every 9 seconds

I'm getting error code 1 on my 5208 chartplotter I have 2

Customer Question

I'm getting error code 1 on my 5208 chartplotter I have 2 units do I need to connect the 2 together with a network cable or is all shared thru nmea backbone
Submitted: 7 months ago.
Category: Marine Electronics
Expert:  Russell H. replied 7 months ago.
Hi, thank you for contacting JustAnswer.com. My name is***** will do my best to provide the right answer to your question. If that error code 1 were a radar error code, it would mean that the heater has a problem in your radar antenna (as opposed to the magnetron or the rotation). You can hook units together with network cable, yes, and it is faster that way. They can be shared through NMEA backbone also.

Related Marine Electronics Questions