How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 15457
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a hds 9 gen 2 touch on my trolling motor and a 10 on

Customer Question

i have a hds 9 gen 2 touch on my trolling motor and a 10 on my dash. my 9 has a spotlight transducer installed on it for some reason I cannot read depth. I go to settings, network data source and select sonar. Depth no longer shows up
Submitted: 7 months ago.
Category: Marine Electronics
Expert:  Pete replied 7 months ago.

Hi David,

You will need to check the connections and the condition of the wiring first.

Disconnect the cable and reattach it firmly again. Look for any signs of damage.

If it looks ok, test the cable for continuity.

If the cable tests good, then the transducer will need to be replaced.

Related Marine Electronics Questions