How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Tech
Category: Marine Electronics
Satisfied Customers: 3343
Experience:  US Navy (Ret) I have been installing Marine Electronics for over a decade now.
67216606
Type Your Marine Electronics Question Here...
Charles is online now
A new question is answered every 9 seconds

Brett reeder from Columbia South Carolina ,I have the Garman

Customer Question

Charles, Brett reeder from Columbia South Carolina ,I have the Garman auto pilot. Keeps popping up on screen auto pilot controller lost all auto pilot functionality diss able . Any ideas on what's wrong with it. Thanks, ***** *****(###) ###-####
Submitted: 10 months ago.
Category: Marine Electronics
Expert:  Charles replied 10 months ago.

Hello, this is Charles. How are you?

Which model do you have?

About how old is the unit?

Customer: replied 10 months ago.
Less then 1 year. Copyright 2012-2015. Gps19x-nmea2000
Expert:  Charles replied 10 months ago.

Thanks, ***** ***** the GPS antenna. I need to know which auto pilot that you have in the boat.

Customer: replied 10 months ago.
Will let you know tomorrow , had an emergency call
Expert:  Charles replied 10 months ago.

That is fine. Talk to you then.

Customer: replied 10 months ago.
Ghp-20. K-10-00163-10 autopilot
1040xs gps & chart plotter
Expert:  Charles replied 10 months ago.

Got it thanks.

First make sure that the power to the NMEA 2000 network is functioning. There will be a fuse in the power supply for it. Then look all the NMEA connections. What you have happening is that the CCU and the charlplotter are losing communication with each other. If you never get the auto pilot to work. You may ned to preform the dealer set up again. That is listed in the Installation manual.

Related Marine Electronics Questions