How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Russell H. Your Own Question
Russell H.
Russell H., Service Tech
Category: Marine Electronics
Satisfied Customers: 9549
Experience:  8+ years of professional experience
13568747
Type Your Marine Electronics Question Here...
Russell H. is online now
A new question is answered every 9 seconds

How do i program my static data ( MMSI, IMO, CALL SIGN ) on

Customer Question

How do i program my static data ( MMSI, IMO, CALL SIGN ) on Furuno FA 150 AIS
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Russell H. replied 1 year ago.

Hi, thank you for contacting JustAnswer.com. My name is Russell. I will do my best to provide the right answer to your question.

The MMSI, the IMO, and the Call Sign, are all among the 'Static Data'.

The Static Data may be set, by (from the plotter display) pressing DISP key, twice, to show the

OWN STATIC DATA

screen. Then one sets the data there in the usual manner.

If there is a problem with that at some point, let me know. Thanks.

Related Marine Electronics Questions