How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 16890
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

I have a 1731 radar and need to know the pin assignments 24

Customer Question

I have a 1731 radar and need to know the pin assignments for the 24 pin connector at the back of the display. The wires with the crimp-on pins were removed from the blue pin holder in order to pull the cable through a weather gland whr
en the dome unit was relocked, the color / number pin locations notes were lost. The wires are all numbered if that helps. Thanks
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Pete replied 1 year ago.

Hi there,

The wiring is shown on the schematic diagrams at the rear of the following manual:

http://www.furunousa.com/ProductDocuments/1731%20OME.pdf

Related Marine Electronics Questions