How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 15775
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

Have gen 2 HDS10 and a Gen2 HDS7 at the console both

Customer Question

Have gen 2 HDS10 and a Gen2 HDS7 at the console both structure scan capable.....HDS9 gen3 with chirp at the bow....everything working fine....yesterday on the water sonar on both console units stopped working....Structure scan reads no source and sonar just does not read at all.Sonar Hub problems??
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Pete replied 1 year ago.

Hi there,

Yes, this is likely a problem with either the cables or the sonar hub.

Check that all cable connections are secure and there is no damage to the cabling.

If all seems fine, then try swapping in a replacement sonar hub.

Related Marine Electronics Questions