How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Tech
Category: Marine Electronics
Satisfied Customers: 3342
Experience:  US Navy (Ret) I have been installing Marine Electronics for over a decade now.
67216606
Type Your Marine Electronics Question Here...
Charles is online now
A new question is answered every 9 seconds

1980 Black max 150 mercury. what size socket do I need

Customer Question

1980 Black max 150 mercury. what size socket do I need for the flywheel bolt?
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Charles replied 1 year ago.
Hello, my name is***** you for allowing me to assist you today. Your question may take more that one post to get an accurate answer.
To pull the flywheel, you need to remove the nut in the center. It is 15/16". Leave the smaller bolts alone on the ring. If you remove them you can mess up the timing of the motor.

Related Marine Electronics Questions