How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Tech
Category: Marine Electronics
Satisfied Customers: 3342
Experience:  US Navy (Ret) I have been installing Marine Electronics for over a decade now.
67216606
Type Your Marine Electronics Question Here...
Charles is online now
A new question is answered every 9 seconds

I have a HDS 10 and a HDS 7. Recently, I had a problem

Customer Question

I have a HDS 10 and a HDS 7. Recently, I had a problem occurred during use whereby the shaded relief disappeared. My HDS 7 is getting its info via Network from the HDS 10. What is strange is that the HDS 7 continued to show the shaded relief while the HDS 10 didn't. How do I get the HDS 10 working properly again?
Also I just purchased a Navionics Platnum plus which I inserted into the HDS 10. However this info is not being shared with the HDS 7. What do I do?
Submitted: 1 year ago.
Category: Marine Electronics
Expert:  Charles replied 1 year ago.

Hello, my name is Charles.

On the HDS units make sure that you have the latest updated software. Lowrance is on 4.5 for these units. Once updated they should function normally.

Related Marine Electronics Questions