How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: Marine Electronics
Satisfied Customers: 15772
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your Marine Electronics Question Here...
Pete is online now
A new question is answered every 9 seconds

Have installed new G3 radar on HDS Gen 1 . I loaded software

Customer Question

Have installed new G3 radar on HDS Gen 1 . I loaded software version 4.1 which I got on the web. When i do the installation setup it ends up with message "radar not recognized" Can you help me?
Submitted: 1 year ago.
Category: Marine Electronics
Customer: replied 1 year ago.
These are Lowrance units
Expert:  Pete replied 1 year ago.
Hi there,
This could be caused by a bad cable.
Try replacing the ethernet cable between the 3G unit and the HDS unit.
Also try with the autopilot and/or depth finder turned on. Sometimes a combination of these turned on or off can help get the radar working.
If the above does not work, then you may have a bad 3G unit - get it swapped for another one and try again.

Related Marine Electronics Questions