How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Pete Your Own Question

Pete
Pete, Computer Engineer
Category: Mac
Satisfied Customers: 15771
Experience:  Over 16 years of computer experience, CISCO certified
30970729
Type Your Mac Question Here...
Pete is online now
A new question is answered every 9 seconds

Working on a Mac with SketchUp Make 15.3.329: I create a 90

Customer Question

working on a Mac with SketchUp Make 15.3.329: I create a 90 degree arc in the ground plane and with end points normal to two axes. Then I add a circle, centered on an endpoint of the arc, in-plane with the axes. I select the arc, choose the Follow command, and select the circle. Why does the torus appear a few degree off of the plane of the axes?
Submitted: 1 year ago.
Category: Mac
Expert:  Pete replied 1 year ago.

Hi there,

Try refreshing the view and let me know if the sketch updates ok?

Customer: replied 1 year ago.
refresh view? how do you do that?
Customer: replied 1 year ago.
Here's a file with the problem. https://www.dropbox.com/s/che6ph4du6pvuu3/torus%20section.skp?dl=0
Customer: replied 1 year ago.
by the way, thank you :-)
Customer: replied 1 year ago.
ahha!!! i got it. using arc tool does bot produce arc that is normal to the axes
Expert:  Pete replied 1 year ago.
Glad to hear you got it sorted!
Pete.