This is in safety protection mode , when the A/C control module sees a malfunction with in the system it will switch off
the compressor to stop any possible compressor damaged ,
Could be anything from a high or low pressure sensor failure ,
You need to get hooked up to a diagnostic scan tool and check for A/C malfunction codes .
Most common issue on your car is the A/C compressor relay . but a diagnostic check for codes will confirm this possible
Then if needed please get back to me with the reply button, and not the poor or bad service, this way i can get back to you or suggest another expert if needed.
Your deposit does not pay me until the answer is rated in a positive way,
Not rating or a bad rating does not constitute a refund.
If you are not happy or you have sorted out your problem before the answer then please let me know with the reply button .
Kind regards Greg.