apire v5-531-4636 has fail to start/launch startup and repair....says it can't repair automatically...if enter start normally goes back to same message..what needs to be done
Computer OS: Windows 7What have you tried so far?: auto repair and normal startup
Hi, my name is XXXXX XXXXX X'll be happy to help you today.Let me ask you, do you have any data on the machine that you can't afford to lose?You can reply back to me via the "Continue the Conversation" tab.
Relist: Other.expert asked one question I responded and he never responded back
Hi, I'm Ron. Thank you for asking a question. If you can't get the start up repair to work, do you have a set of recovery disks from Acer to restore to factory condition? If you have files on the hard drive that you must have, the drive can be removed and accessed with an external hard drive docking station and saved on another drive before restoring the system to factory condition. If you don't have the disks, you can get them from Acer.If you are willing to have the system repaired by a certified repair depot, they can use the original windows installation disk to try and repair the start up manually first. If it fails, they could save the data for you and restore it once they do the recovery. There is a very good chance that the start up repair can be done manually with the installation disk and the recovery will not be necessary.
no recovery disc came with computer-it was new from target -it is ACER
You can order the disks from Acer's website. If it is less than a year old, it should be under warranty.
just bought it in July thanks
They will repair that for free. You can check with the Acer website and they can give you a local certified repair depot in your area to take it to and get it done for you.
Please don't forget to rate my service as it is determines if I am compensated for my assistance.
Please rate my service to close out your question.