How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Kia
Satisfied Customers: 33449
Experience:  35 years as an automotive tech
7276279
Type Your Kia Question Here...
Ron is online now
A new question is answered every 9 seconds

I have a p0720 code and trying to find the pin piont test

Customer Question

i have a p0720 code and trying to find the pin piont test for it
JA: Do you have a scan tool to read the codes?
Customer: yes
JA: What is the model/year of your Kia?
Customer: 2006 sedona
JA: Are you fixing your Sedona yourself? What have you tried so far?
Customer: i am a mechanic shop, i have replaced the wiring to the sensor as it came to me broken and then replaced the sensor. i have inout speed senor info but the output reads 0
JA: Anything else you want the mechanic to know before I connect you?
Customer: i am the mechanic
Submitted: 26 days ago.
Category: Kia
Expert:  Ron replied 26 days ago.

Hello. My name is ***** ***** I am happy to assist you today. Give me just a moment to review your post, and I'll be right back with the help you need.

Customer: replied 26 days ago.
ok
Expert:  Ron replied 26 days ago.

Which engine do you have , is this the 3.8?

Customer: replied 26 days ago.
3.5 v6
Customer: replied 26 days ago.
it is a 2005 sorry was looking at the info wrong and said it was a 2006.
Expert:  Ron replied 26 days ago.

Yea I just figured that out. I have enclosed the steps in the link below to check this code P0720. This code can be set due to any of the following.

Customer: replied 26 days ago.
will one of these resets work with my snapon scanner
Expert:  Ron replied 26 days ago.

Im not sure the reset can be done with a Snap On scan tool. In omst cases it done with a Kia scan tool.