How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kiatech Your Own Question
Kiatech
Kiatech, Kia Master Technician
Category: Kia
Satisfied Customers: 210
Experience:  30+ years experience,ASE certified,KIA certified Master Technician,Ford factory trained
32162675
Type Your Kia Question Here...
Kiatech is online now
A new question is answered every 9 seconds

Sure I some how in the process of changing the timing belt

Customer Question

Sure I some how in the process of changing the timing belt got the can
JA: Tell me a bit more about what's going on so he can help you best.
Customer: I got the crank cam sprocket out of sink with the cam 2nd from the fire wall how can I get it back?
JA: Are you hoping to fix this yourself?
Customer: yes
JA: Great! What have you tried so far?
Customer: Setting the crank at 90 off tdc a lining the sprockets to timing marks rear sprocket lines up 2nd gets to a point and will not turn any further.
JA: Is there anything else important you think the Kia Mechanic should know about your Kia?
Customer: 3.5L v6 Mitsubishi engine I'm sure that the valves are crashing into each other or piston.
JA: Our top Kia Mechanic is ready to take your case. Just pay the $5 fully refundable deposit and I'll fill the Kia Mechanic in on everything we've discussed. You can go back and forth with the Kia Mechanic until you're 100% satisfied. We guarantee it.
Submitted: 10 months ago.
Category: Kia
Expert:  George H. replied 10 months ago.

Hello I will help you with your question,

So it is the rear intake sprocket that turned?

Have you tried turning it around the other direction?