How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Mechanic
Category: Kia
Satisfied Customers: 20708
Experience:  Shop Owner, Line Mechanic, Electronics
1609972
Type Your Kia Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Recently my connector broke of my camshaft position sensor.

Customer Question

hello
recently my connector broke of my camshaft position sensor. I have three wires one brown one black and one yellowish of the harness side.
can you tell me in which order i have to place them back on the cmps? from above to below
Submitted: 1 year ago.
Category: Kia
Expert:  john aka eauto replied 1 year ago.

here ya go

Customer: replied 1 year ago.
thank you but it doesnt say the colors there are three pins vertically in the cmps and i want to put the wires back in
i want to put them back temporarily and order a new connector. Do i have to change the whole cable harness of the engine?
Recently i changed my coolant hoses after that my engine started to stutter and has poor acceleration
Expert:  john aka eauto replied 1 year ago.

well one is ground one has a 5volt reference and the other is battery power...kia does not show the colors in the diagram...but with that pis and info it can be figured out

Customer: replied 1 year ago.
thank you but it doesnt say the colors there are three pins vertically in the cmps and i want to put the wires back in
i want to put them back temporarily and order a new connector. Do i have to change the whole cable harness of the engine?the wires i can figure out with a voltmeter but i need to know the diagram of the sensor three pins vertically
Expert:  john aka eauto replied 1 year ago.

1 is ground 2 is signal 3 is battery voltage

Expert:  john aka eauto replied 1 year ago.

you can likely cut a pigtail and use that they should have a repair harness

Customer: replied 1 year ago.
here are some pix
Expert:  john aka eauto replied 1 year ago.

cant make out the connector

Expert:  Don 'Mo Lurch' replied 1 year ago.

.

sorry for the delay............
.
Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”
.
PIN 1 = PINK
PIN 2 = YELLOW
PIN 3 = BLACK

.
IF you need more information, please ask "prior" to Rating.
.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.