How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mark Your Own Question
Mark, Technician
Category: Kia
Satisfied Customers: 11328
Experience:  22 Years Experience
Type Your Kia Question Here...
Mark is online now
A new question is answered every 9 seconds

Kia Sportage LX: how do you change a rear wheel bearing in

Resolved Question:

how do you change a rear wheel bearing in a 2006 kia sportage fwd
Submitted: 4 years ago.
Category: Kia
Expert:  Mark replied 4 years ago.
The first step, obviously, is to remove the wheel.

Remove the caliper mounting bolts , and hang the caliper assembly to one side. To prevent damage to the caliper assembly or brake hose, use a short piece of wire to hang the caliper from the undercarriage.

Remove the wheel speed sensor

Loosen the brake disc mounting screw , and then remove the brake disc from the hub .

Using a screwdriver, remove the hub cap

Remove the hub bearing flange nut .
.....Using a flat-tipped screwdriver, spread out the groove on the flange nut
.....Loosen the hub bearing flange nut

Remove the rear hub washer and rear hub assembly

I hope this information is helpful and let me know if you need further assistance with this.

Mark and 2 other Kia Specialists are ready to help you

Related Kia Questions