How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Your Own Question
Kevin
Kevin, Auto Mechanic
Category: Jeep
Satisfied Customers: 1536
Experience:  Diagnostic technician
84635724
Type Your Jeep Question Here...
Kevin is online now
A new question is answered every 9 seconds

No clutch after replacing master clutch cyl & don't know how

Customer Question

no clutch after replacing master clutch cyl & don't know how to bleed after installation. Could slave be bad or new master be bad
JA: How many miles are on the clutch? Has it been slipping or sticking?
Customer: not til the day it went. 91,579 mi.
JA: What is the model of your '91 Jeep?
Customer: 2009 jeep comlass sport, 2.4l, fwd, dohc 5 spd
JA: Are you fixing your Compass yourself? What have you tried so far?
Customer: yes
JA: Anything else you want the mechanic to know before I connect you?
Customer: hopefully that's all
Submitted: 12 days ago.
Category: Jeep
Expert:  Kevin replied 12 days ago.

Hi im kevin can we confirm you havent bled clutch at all?

Customer: replied 12 days ago.
Right..I don't know how.
Customer: replied 12 days ago.
I had someone else put the master in, but he can't help me now..He had to work today & I'm missing 10 days of work today myself...I'm on my own
Expert:  Kevin replied 12 days ago.

Ok it has to be bled you need to get under car and locate clutch slave cylinder on side of gearbox it will have a bleed nipple on it .you will then need soneone to sit in vehicle and get them to assist with bleeding .so you need to open nipple and get assistant to press and hold clutch pedal down then do nipple up .assistant can then release pedal .then keep doing this process until pedal returns .you will need to keep topping up resevoir whilst carrying out this process

Customer: replied 12 days ago.
On the drivers side by the transmission? Or in or in gent under the master..that's where I'm confused..once I find the border I know what to do from there
Expert:  Kevin replied 12 days ago.

Its attached to transmission on drivers side

Customer: replied 12 days ago.
Your a Jewel! I love it when I'm right! Thanks for my sanity! I'll let you know what happens when I'm finished Kevin, thank you very much!
Expert:  Kevin replied 12 days ago.

No worries please rate my service and let me know if you need anything else

Expert:  Kevin replied 11 days ago.

Please rate my service and let me know if you need anything else at all

Related Jeep Questions