Have Jeep Questions? Ask a Jeep Repair Expert for Answers
Hello. Welcome to Just Answer. Please allow me to assist you. This sounds a lot like a dryness issue. If you have some, or can get some, get a can of spray silicone lubricant. Locate the rod where the clutch pedal goes thru the firewall and spray the rod liberally with the silicone spray, then work the pedal in and out. This should take care of the problem.
If you have any questions, please feel free to reply. Please do confirm that you have received my input. Thanks.
If that does not do the job than you have a faulty throw-out bearing.
The throw out bearing is only active when the clutch is depressed. It is common for them to be noisy cold, and then be less noisy when warmed up. You may need to have the trans removed and the throw out bearing replaced. Without hearing the noise, it is hard to pinpoint the issue, but, one of the other is your issue.