How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Jeep
Satisfied Customers: 22362
Experience:  Chrysler/Dodge/Jeep Master Certified, ASE Master and Advanced Certified, Trans and Hybrid Specialist
Type Your Jeep Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Got up, started fine, drove to get gas, red light between

Customer Question

got up, started fine, drove to get gas, red light between speedo and Tach on. started fine, windshield wippers started, wont shut off, no horn, no turn signal, no gas guage, tach or mileage all warning lights on. Warning sound from dash cam on. Had it towed home, now it won't come out of park.
JA: Do you have brake lights? Have any trouble codes popped up?
Customer: Yes
JA: What is the model/year of your Jeep?
Customer: 2j012
JA: What year is your Jeep?
Customer: liberty 4whl drive
JA: Are you fixing your Liberty yourself? What have you tried so far?
Customer: Trying to. Disconnected battery for about 15 minutes still same when reconnecting
JA: Anything else you want the mechanic to know before I connect you?
Customer: windows work, door locks work, horn don't work. rear wiper don't work. radio works
Submitted: 7 months ago.
Category: Jeep
Expert:  sprinkles08 replied 7 months ago.

Hello and welcome to JustAnswer!

You may have an internal failure in the instrument cluster or the issue may be with CAN bus communication. The lights and wipers are on because the TIPM isn't communicating with the instrument cluster. The warning lights are on because the cluster isn't communicating with other modules.

Do you have a can tool capable of communicating with all modules?