Have Jeep Questions? Ask a Jeep Repair Expert for Answers
Hi . Thank you for asking your question on JustAnswer.can you get me the code?Thank you again for trusting us with your problem. John aka eauto
ok so what is it doing or not doing?
why did the shop just erase the code?
Well this can be caused by multiple things. I could be as cheap as need the ABS system re initialized and though usually cost about 100 to needing an ABS module and that cost about 700 to needing a steering angle sensor which runs about 400 for the repair to just a wheel speed sensor failure which is about 200 for the repair. With out knowing what codes are in the system i cant tell you what area or give you an estimated cost. Most common of what i see is a failed wheel speed sensor
at the wheel hub...but its a guessing game without the code
great hope you can rate my service 5 star
Please remember to only rate my service when you are satisfied. IF you feel the need to rate "Poor Service" or "Bad Service", please stop and reply to me via the REPLY TO EXPERT button with the issue you have. I will be happy to continue further and do everything I can to provide you with the service you seek.I am not paid unless I get a rating of 3 to 5 Stars/Smiley Faces. As always I'm happy to provide my time/service & resources so If I have helped you with your question, please give me an appropriate rating so that I get credit for helping you. Thank you and good luck with your vehicle!