How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Mechanic
Category: Jeep
Satisfied Customers: 20529
Experience:  Chrysler Warnty, Heavy Line Mech, Mobile Electronics. Sales, Installation & Repair for 30 years
1609972
Type Your Jeep Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I want to know how remove the anti theft system from my 1999

Customer Question

I want to know how remove the anti theft system from my 1999 jeep grand cherokee
JA: Are you fixing your Grand Cherokee yourself? What have you tried so far?
Customer: yes, we looked in the fuse box but dont know what fuse it is.
JA: Have you checked the manual yet? Most vehicles have two fuse panels.
Customer: where should i look in the manual?
JA: Anything else you want the mechanic to know before I connect you?
Customer: nope
Submitted: 2 months ago.
Category: Jeep
Expert:  Don 'Mo Lurch' replied 2 months ago.

You cannot Disable or DisArm by removing a Fuse
You cannot "Remove" the Factory Alarm, without extensive rewiring, as there are a number of Components that go thru the Alarm Module
Ignition, Lights, Locks, Starter, Fuel, etc.
You can DisArm the Factory Alarm by locating the LIGHT GREEN / ORANGE (-) wire in the Driver Door.
Connect one end of a piece of wire to the LIGHT GREEN / ORANGE (-)
Connect the other end of the piece of wire to Ground (metal, frame etc
This will DisARM the Factory Alarm until the wire is removed

Expert:  Don 'Mo Lurch' replied 2 months ago.

hello?