How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad
Brad, Jeep Dealership Tech
Category: Jeep
Satisfied Customers: 7380
Experience:  19 Yrs Chrysler/Dodge/Jeep. ASE Master (L-1) Certified
10114124
Type Your Jeep Question Here...
Brad is online now
A new question is answered every 9 seconds

I want to put the SRT driving lights on my laredo ( i have

Customer Question

i want to put the SRT driving lights on my laredo ( i have put the SRT body kit on it) and need to work out how it to wire them up
JA: Just to clarify, what are the exact lights you're talking about?
Customer: the led lights in the front bumper
JA: What is the model/year of your SRT?
Customer: 2015 laredo with the SRT front bar on it
JA: What year is your SRT?
Customer: 2015
JA: Are you fixing your vehicle yourself? What have you tried so far?
Customer: i have taken the laredo front bar off and put the srt front bar on and need to make the led/fog lights work
JA: Anything else you want the mechanic to know before I connect you?
Customer: no
Submitted: 5 months ago.
Category: Jeep
Customer: replied 5 months ago.
what wires do i need to join up
Expert:  Pete replied 5 months ago.

Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay.

Have you connected any of the wires at all from the factory harness?

Let me know so we can continue,thanks Pete

Customer: replied 5 months ago.
No I haven't hooked anything up I'm not sure what wires are which, my jeep is a 2015 4x2 Laredo and I have installed a srt body kit and I want to connect the drls in the bumper and power them through the existing lights
Expert:  Pete replied 5 months ago.

Do you have a diagram for the new bumper for each wire?

Customer: replied 5 months ago.
No I don't have any diagrams.
The fog lights are ok they plug straight into the new ones but the led strip lights in the bumper don't so I need to know which is the best wire to hook into to run them
Customer: replied 5 months ago.
Do you have a wiring diagram of the 2015 jeep?
Customer: replied 5 months ago.
Why have I not recieved an answer to my question after two days ?
Not very impressed with The Service at all and I want my money back
Expert:  Pete replied 5 months ago.

I apologize for the delay as an emergency had come up.

Are these two wire led strips and do you know which wire is power and which is ground on them?

Customer: replied 5 months ago.
White is power and grey is ground
Expert:  Pete replied 5 months ago.

O.k.,after looking through my diagrams on this here unfortunately I do not show the correct power and grounds to connect to this wire myself.

I will open your question up for others here to see if someone else can assist further on this as there may be others here that may have more info on what to check or do with this issue.I hope you can get this resolved with ease.No need to reply to my last post here unless it is a last resort as it will keep your question locked to me and others will not be able to view it.If you feel you want to continue to work with me on this feel free to reply at any time but keep in mind in some cases it can be difficult to fully diagnose or help repair this without seeing your vehicle.

Thanks Pete

Expert:  Brad replied 5 months ago.

Good morning and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 19 years and I will do my best to help.

Can I get your VIN to grab a wiring diagram for you?

Customer: replied 5 months ago.
It's
1C4RJEEG9FC864589
Expert:  Brad replied 5 months ago.

Thanks for the VIN!!!

I have attached the wiring diagram. The left fog light is White/Yellow for 12v and the right is White/Orange then ground both to Black wire or to the frame..

Expert:  Brad replied 5 months ago.

I see you haven't rated yet which means I have not been credited for helping. Don't forget to honor your good faith deposit by rating my assistance.. And if you need more assistance you can reply anytime..

Thank you and have a great day,

Brad