How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag, Tech and Instructor
Category: Jeep
Satisfied Customers: 6716
Experience:  Since 1975
Type Your Jeep Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

We have a 1998 jeep transmission code for governor pressure

Customer Question

We have a 1998 jeep transmission code for governor pressure too high. Replaced solenoid and code still there. Any suggestions?
Submitted: 2 months ago.
Category: Jeep
Expert:  rpmdiag replied 2 months ago.

Hi, welcome to Just Answer. I’m Ron and I’ll be helping you
Before we get started though, Please understand that I don't know
your skill level or tools you have to assist us. Also understand that
I can't see, smell, hear, or touch the vehicle either, so patience is
appreciated. JA is a great Q/A site, but it does NOT replace a
repair shop.
My goal is to make you happy and get a great rating in return for
my time. Sometimes I have to give you bad news that I know you
didn’t want to hear, so please don’t shoot the messenger.

It's not always the part that's bad like in this case, there can be fluid return restrictions inside the valve body that increase pressures or metal debris in the system.

Thanks, Ron

Customer: replied 2 months ago.
I'm not sure where to go from here. Money flow is limited at this point. Would tyranny have to be dropped and replaced ?
Expert:  rpmdiag replied 2 months ago.

yes, it needs to be inspected to isolate the problem you're having. Unfortunately there's no way around that.

thanks again, and please don't forget to rate me and keep this link in case you need me again later on.


Related Jeep Questions