How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3168
Experience:  Jeep Certified Master Tech
12365498
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

Both rear turn signal lights dont work. Replaced bulbs,

Customer Question

both rear turn signal lights dont work. Replaced bulbs, replaced hazard switch no change.. i am ready to burn this pile of crap/...
JA: Have you checked the fuse? Have you checked for bad bulbs?
Customer: did you read what i wrote?
JA: What is the model/year of your Jeep?
Customer: 2007 libery
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: ok its obvious that you are a computer.
JA: I'm an assistant to the Jeep Mechanic. I work with them to help customers like you.
Customer: so read above.
JA: Anything else you think the mechanic should know?
Customer: nope
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Jeep Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Jeep
Expert:  Chad Farhat replied 5 months ago.

Hi, I'm Chad ,Welcome To JustAnswer, I'm reviewing your question and I will be be posting a replay ASAP

are you getting power to the rear bulbs when turn signal is switched on are the front ones working ?

Please let me know

Thank You
Chad Farhat
ASE Certified Technician

Customer: replied 5 months ago.
Front ones are working. All other lights on rear work. Brake, tail, reverse
Expert:  Chad Farhat replied 5 months ago.

do you have test light can you check for power & ground at the rear bulbs socket ?

Customer: replied 5 months ago.
The turn signal bulb is also the brake bulb which works so I am assuming there is power and ground
Expert:  Chad Farhat replied 5 months ago.

yes but i wanted to see if the test light is dim when u check , if you think you have good power & grounds , then the turn signal switch in the steering will be the next place to go too

could be working the front but internally not powering up the rear .

Customer: replied 5 months ago.
Ok give me a sec. I'll throw a test light on it
Expert:  Chad Farhat replied 5 months ago.

ok cool take your time

Customer: replied 5 months ago.
Power is great to the assembly. Checking ground now
Customer: replied 5 months ago.
Flashing test light with signal on power side
Expert:  Chad Farhat replied 5 months ago.

ok

Customer: replied 5 months ago.
I can look all of these diagrams up on all data. I thought you might have some guidance.
Expert:  Chad Farhat replied 5 months ago.

well man i m studying the circuit as we speak , but no worries i will op out for another expert i cant work that fast, sorry, i sent you those diagrams so we can comapare

good luck

Customer: replied 5 months ago.
Later

Related Jeep Questions