How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3137
Experience:  Jeep Certified Master Tech
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

Hve a 2005 Jeep 5.7. Engine light comes on and off at

Customer Question

Hve a 2005 Jeep 5.7. Engine light comes on and off at random. What is the proceedure to replace the valve & where is it located? Thanks, Jim
JA: Have you checked all the fuses? Do you have a wiring diagram?
Customer: Have not checked fuses. Hve wiring diagram.
JA: What is the model of your '05 Dodge?
Customer: It is a Jeep 2005 Grand Cherokee with the Hemi engine
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Hven't tried anything. Would like to diy if not too tough.
JA: Anything else you think the mechanic should know?
Customer: Not at present. Thanks, Pearl.....Jim
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Dodge Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Jeep
Expert:  Brad replied 4 months ago.

Good afternoon and welcome to JustAnswer!!

My name is ***** ***** I have worked for a Chrysler-Dodge-Jeep dealership for 19 years and I will do my best to help.

I work part-time here on JustAnswer to help you and other repair their own vehicles, and I get credited by your ratings.. So before leaving the site make sure and leave me a rating. You can still reply to me as many times as needed, even after the rating.. I will need for you to be my hands and eyes since I'm not there, and to be honest with today's electronics a scantool may very well be needed to retrieve the codes or to monitor data to see what's going on...

What valve are you referring to?