How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HDGENE Your Own Question
HDGENE
HDGENE, ASE Certified Technician
Category: Jeep
Satisfied Customers: 4847
Experience:  25 years experience.ASE Master Technician w/L1 Advanced Drivabilty Certification
285738
Type Your Jeep Question Here...
HDGENE is online now
A new question is answered every 9 seconds

My friend washed the motor, and now the jeep cranks, wont

Customer Question

My friend washed the motor, and now the jeep cranks, nut wont start. HELP We have looked at all of the spark plugs and wires, and replaced the distributor cap!
Submitted: 7 months ago.
Category: Jeep
Expert:  HDGENE replied 7 months ago.

Hello, if you have no spark or fuel injector pulse, take a look at the crank sensor located at the rear of the engine at the bellhousing area of the transmission. If water is in the connector, you will loose rpm signal and have no spark or injector pulse.

Expert:  HDGENE replied 7 months ago.

Hello, do you need more help or information?

Expert:  HDGENE replied 7 months ago.

Hello, do you need more help or information?