How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Derek Werner Your Own Question
Derek Werner
Derek Werner, ASE Certified Technician
Category: Jeep
Satisfied Customers: 135
Experience:  ASE Master Technician, L1 Advanced level specialist
61695331
Type Your Jeep Question Here...
Derek Werner is online now
A new question is answered every 9 seconds

I have a 1989 jeep wrangler my headlights tail lights and

Customer Question

I have a 1989 jeep wrangler my headlights tail lights and blinkers work but when i push brake pedal brake lights wont come on any thoughts
Submitted: 6 months ago.
Category: Jeep
Expert:  Derek Werner replied 6 months ago.
Hello and thanks for using JustAnswer! It is very likely your stop lamp switch has high resistance in the internal contacts. The stop lamp switch is located on the brake pedal assembly, i recommend replacing this switch. Disconnect battery ground cable.Disconnect electrical connector for stop light switch.Remove bolt and locknuts attaching brake pedal to stop light switch and pushrod.Remove stop light switch and bushings from brake pedal.Reverse procedure to install.If you could kindly rate my service it would be very appreciated so i can receive credit. I will continue to work with you even after rated, and get notifications about any other questions you may have. I only strive for excellent service, Thank you for being a great customer.Derek W
Customer: replied 6 months ago.
It was a blown fuse
Expert:  Derek Werner replied 6 months ago.
ok great I am glad you got it figured out. If you need any other help please let me know. Thanks Derek

Related Jeep Questions