How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask CHRIS ZAPANTIS Your Own Question
CHRIS ZAPANTIS
CHRIS ZAPANTIS,
Category: Jeep
Satisfied Customers: 159
Experience:  AUTO TECH at G&M EXXON
83135375
Type Your Jeep Question Here...
CHRIS ZAPANTIS is online now
A new question is answered every 9 seconds

Wrangler: 2010 Jeep Wrangler Sahara 4x4 auto transmission...front

Customer Question

2010 Jeep Wrangler Sahara 4x4 auto transmission...front seal/pump oring seems to be bad..leaking fluid out bad..any special tools needed to replace pump seal once I get the transmission out??
Submitted: 7 months ago.
Category: Jeep
Expert:  CHRIS ZAPANTIS replied 7 months ago.
Hello Im chris and i will try to assist you
Expert:  CHRIS ZAPANTIS replied 7 months ago.
Are you replacing the pump seal or the torque converter seal?
Expert:  CHRIS ZAPANTIS replied 7 months ago.
You wouldnt be able to see the pump seal with the tranny in.
Customer: replied 7 months ago.
Pump seal
Expert:  CHRIS ZAPANTIS replied 7 months ago.
ok you need two slide hammers c-3750 to svrew into it and pull it out
Expert:  CHRIS ZAPANTIS replied 7 months ago.
thats c-3752 not 50
Expert:  CHRIS ZAPANTIS replied 7 months ago.
according to the manual you shouldnt reuse the pump bolts.
Expert:  CHRIS ZAPANTIS replied 7 months ago.
http://www.toolsource.com/slide-hammer-front-pump-remover-p-114260.html
Expert:  CHRIS ZAPANTIS replied 7 months ago.
http://www.toolsource.com/slide-hammer-front-pump-remover-p-114260.html
Expert:  CHRIS ZAPANTIS replied 7 months ago.
thats what they look like and they are not too expensive
Expert:  CHRIS ZAPANTIS replied 7 months ago.
Any other questions?
Expert:  CHRIS ZAPANTIS replied 7 months ago.
If I have answered all your questions please rate me so I can get credit for my time and good luck!
Customer: replied 7 months ago.
Any possibility of getting part number for pump oring/seal, and shaft seal, bolts aswell..thanks
Expert:  CHRIS ZAPANTIS replied 7 months ago.
Gimme a minute
Customer: replied 7 months ago.
No rush, won't be working on it until saturday, just want to get parts in before hand
Expert:  CHRIS ZAPANTIS replied 7 months ago.
I cant find any part numbers for anything that has to do with the pump. How I do it is i have a local transmission shop I go to and buy it from him. If i were you I would do the same most of them are cool with selling you the parts.