How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask b5demon Your Own Question
b5demon, Technician
Category: Jeep
Satisfied Customers: 3716
Experience:  ASE and Chryler/Jeep master technician for 17 years
Type Your Jeep Question Here...
b5demon is online now
A new question is answered every 9 seconds

I have a jeep liberty 2011 that will not fire. this is

Customer Question

i have a jeep liberty 2011 that will not fire . this is intermittent, especially when warm . starter runs on ,but does not fire.changed fuel pump ,still have problems.
Submitted: 7 months ago.
Category: Jeep
Expert:  b5demon replied 7 months ago.

Hi Welcome to Just Answer! Have you replaced the camshaft or crankshaft position sensors?

Customer: replied 7 months ago.
no, The dealership replaced the fuel pump 2 wks ago. the problem is still intermittent.
Expert:  b5demon replied 7 months ago.

ok a bad crankshaft position sensor or camshaft position sensor can act like that too

Expert:  b5demon replied 6 months ago.

Let me know if you still need help with this.

Related Jeep Questions