How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Jeep
Satisfied Customers: 22301
Experience:  Chrysler/Dodge/Jeep Master Certified, ASE Master and Advanced Certified, Trans and Hybrid Specialist
9825021
Type Your Jeep Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I am ***** ***** in the middle of changing running light/

Customer Question

Customer: hello I am ***** ***** in the middle of changing running light/ turn signal on 07 Jeep patriot Bulb replaced and working but someone stripped the wheel well guard clips in the past and things were barely held on. Trying different fasteners from Pep boys but no go, just trying to attach the wheel well guard back on
JA: Thanks. Can you give me any more details about your issue?
Customer: Did you see my messages? Just gave you the details
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $18) to post your type of question to Jeep Experts (you only pay if satisfied). There are a couple customers ahead of you. Are you willing to wait a bit?
Customer: If the solution is getting new clips from a Jeep dealer, I would not be inclined to pay for that advice. If there is another solution, would love to get it done ASAP
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Jeep
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

If you're needing the push pins that hold the fender liners the choices will be to either match them up at a parts store or online source or to purchase the correct Mopar push pins. You can usually match up any of these types of push pins at a parts store, if you have another parts store such as Napa or Autozone I would give them a try.

The part number for the push pins is(###) ###-####A. They're obviously available at your dealer and will be in stock but if you don't want to buy them through a dealer for some reason you can order them from dozens of online sources. If you simply search the part number you'll find many sources such as:

http://fastenerclub.com/index.php?route=product/product&product_id=1823

https://www.parts.com/index.cfm?fuseaction=store.PartInfo&PartNumber=5160260AA&VehicleID=405306&diagram=WD07615&Title%3D-TAIL-LAMP-ASSY-PIN

http://www.tascaparts.com/oe-mopar/5160260aa

Less than $1 each here:

http://www.amazon.com/Bumper-Fender-Push-Type-Retainer-Patriot/dp/B0040CW2N2