How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Amedee Your Own Question
Amedee
Amedee, Jeep Technician
Category: Jeep
Satisfied Customers: 24409
Experience:  ASE certified Technician advanced level specialist. Wisconsin certified emissions state inspector
279429
Type Your Jeep Question Here...
Amedee is online now
A new question is answered every 9 seconds

I'm ***** *****, my 2006 jeep is reading code p0508 or

Customer Question

Customer: Hi I'm ***** *****, my 2006 jeep is reading code p0508 or emissions. I have replaced the following parts. fuel pump, IAC, starter, all the sensors.
JA: Thanks. Can you give me any more details about your issue?
Customer: The truck turn over but it wont start
JA: OK got it. Last thing — JustAnswer charges a fee (generally around $18) to post your type of question to Jeep Experts (you only pay if satisfied). There are a couple customers ahead of you. Are you willing to wait a bit?
Customer: yes
JA: OK. Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 11 months ago.
Category: Jeep
Expert:  Amedee replied 11 months ago.

Hello and welcome! My name is ***** ***** I can assist you with your question. Can I start by getting your VIN? Thank you!

Customer: replied 11 months ago.
be right back
Expert:  Amedee replied 11 months ago.

ok

Customer: replied 11 months ago.
the vin is 1J4GS48k86c11
Customer: replied 11 months ago.
are you there??
Expert:  Amedee replied 11 months ago.

YES, one minute while I pull up your vehicle.

Customer: replied 11 months ago.
ok
Expert:  Amedee replied 11 months ago.

This code is stricly for the IAC circuit. If the IAC motor has been replaced, then it is going to be a wiring issue between the PCM and IAC motor.

Expert:  Amedee replied 11 months ago.

If the wiring checks out good, the PCM is bad and needs to be replaced. Just be sure there are no air or vacuum leaks at all under the hood.

Customer: replied 11 months ago.
I already replaced the pmc and it's no leaks that I can hear
Expert:  Amedee replied 11 months ago.

Ok, then it has to be a wiring issue going to the IAC

Customer: replied 11 months ago.
It used to start but it would start missing at least 3 trys an it would start
Customer: replied 11 months ago.
ok and thanks for the advice
Expert:  Amedee replied 11 months ago.

Please accept my offer and call me now

Customer: replied 11 months ago.
When I change the wiring I'll respond thanks
Expert:  Amedee replied 11 months ago.

Ok, sounds good!

Expert:  Amedee replied 11 months ago.

Hello! It's Amedee from just answer. I am just checking in to see how things are going and to see if you need any further assistance? Please let me know and I will be happy to help!

Expert:  Amedee replied 11 months ago.

.

Related Jeep Questions