How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Juan Crespo Your Own Question
Juan Crespo
Juan Crespo, ASE Certified Technician
Category: Jeep
Satisfied Customers: 1513
Experience:  A.S.E. Master Technician, Advanced Level, Emissions - Asian, Domestic, & European
19298667
Type Your Jeep Question Here...
Juan Crespo is online now
A new question is answered every 9 seconds

Nothing is working on my 08 wrangler. No lights (I can turn

Customer Question

Nothing is working on my 08 wrangler. No lights (I can turn the dome light on) and when I hit the brakes the 3rd brake light works but that's it. Any suggestions?
Submitted: 1 year ago.
Category: Jeep
Customer: replied 1 year ago.
Also I've tried the battery disconnect for 15min hoping a reset would work but didn't
Customer: replied 1 year ago.
won't start obviously
Expert:  Juan Crespo replied 1 year ago.

Hi there. Welcome to our site.

If the battery reset did not work, the wireless control module (WCM/SKREEM) might be electronically locked-up. Chrysler issued a technical service bulletin addressing that issue (TSB 08-007-08 REV. A).

Since this condition can only be diagnosed with the help of a StarSCAN tool loaded with the appropriate software, we recommend taking the vehicle to a Jeep-approved repair facility.

Please let me know if you need further assistance with this issue.

Best Regards.

Expert:  Juan Crespo replied 1 year ago.

Hi again. Just checking to see if the information I provided helped you solve your issue. If it did, then kindly accept and rate my answer now. If it didn't, please reply.

Best Regards.

Related Jeep Questions