How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 12906
Experience:  Jeep Certified Master Tech
12365498
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

Do you know what size bolt holds in the camshaft sensor. I

Customer Question

hi, do you know what size bolt holds in the camshaft sensor. I disconnected it to test it and gauges started working again, but I want to replace it and it's tight in there, but in feeling it, it seems like there's no bolt on metal tank that holds it into
side of block. I bought this vehicle a few months ago and I don't want to get into replacing it and don't have the bolt. I am going to pick one up, but can you tell me the size bolt to replace?
Submitted: 1 year ago.
Category: Jeep
Expert:  Chris replied 1 year ago.

Hello, that is a 13 millimeter head on the bolt. It is an 8 mm metric thread and is about 1/2 inch long

Chris