How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3163
Experience:  Jeep Certified Master Tech
12365498
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

2002 grand Cherokee replaced all four ball joints and still

Customer Question

2002 grand Cherokee replaced all four ball joints and still have camber off both sides one a little worse than the other, toe in at the top. How can I correct with out putting off set upper ball joints. Has any body ever heated the upper ball joint arm out or maybe even machining the face for hub flange to chamber straight. Really need help.
Submitted: 1 year ago.
Category: Jeep
Expert:  eauto replied 1 year ago.

heating the control arm is a big no no.. Machining the hub flange is probably not the wisest either the hub may not tighten up correctly... Off set ball joints is the only correct repair. did you measure ride height?