How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Master Tech
Category: Jeep
Satisfied Customers: 12803
Experience:  ASE Master Tech, L1, Jeep owner, Shop owner
13677702
Type Your Jeep Question Here...
Randall C is online now
A new question is answered every 9 seconds

I need to replace the ignation lock cylinder with broken

Customer Question

I need to replace the ignation lock cylinder with broken key?
Submitted: 1 year ago.
Category: Jeep
Customer: replied 1 year ago.
As it say's,suposed to have a screw holding it in but this one don't have any screws and is very hard to get out.How other can it be locked in??
Expert:  Randall C replied 1 year ago.

some questions for you: grand cherokee or regular? column shift or floor shift? tilt wheel or non tilt? how far have you gone in the repair?, Can you turn the cylinder at all?