Have Jeep Questions? Ask a Jeep Repair Expert for Answers
sorry for the delay.............Greetings...... “Hi, I’m Don (aka MOLurch) and I look forward to helping you!”.There are a couple of different types1) is a PUSH PIN that is inserted into the PINYou would take a pointed tool & press the center PUSH PIN in apprx 1/2 way & then remove the PIN
2) is a PIN that has a screw in Center (phillips)Using a Phillips Screw driver "carefully" unscrew the screw in center & remove the PIN
3) is a Pull Out PIN in the center.Using a Panel Puller tool, release the center Pin by prying out, then remove the PIN
.IF you need more information, please ask "prior" to Rating..The way it works is, "I supply the Answer....You Rate my Answer". Please take a moment to rate my service so that I can get credit for my time.NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.The question will still remain open for follow up questions if needed..Rating is very Important to our Service..
click attachment below