How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3170
Experience:  Jeep Certified Master Tech
12365498
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

Am replacing blower resistor. I replaced it last summer. I

Customer Question

Am replacing blower resistor. I replaced it last summer. I can't disconnect the terminal. I don't see any burnt plastic or evidence of overheating in any way. Th plastic "lock" just doesn't release. Any ideas?
Submitted: 1 year ago.
Category: Jeep
Expert:  Brad replied 1 year ago.
Welcome to JustAnswer!!! My name is***** a 16 Yr Jeep dealership technician and I will be helping you with your question today...
Have you tried wiggling it left to right to work it out? If the lock is released then it might be melted to the resistor.
Let me know,
Brad