How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony Your Own Question
Anthony
Anthony, ASE Certified Technician
Category: Jeep
Satisfied Customers: 11750
Experience:  ASE Master Automobile Technician with over 20 years exp. in this field.
15218643
Type Your Jeep Question Here...
Anthony is online now
A new question is answered every 9 seconds

Just replaced TPS on my 2000 Cherokee Laredo 4.7L smoothed

Customer Question

Just replaced TPS on my 2000 Cherokee Laredo 4.7L smoothed out the idaling perfect, did a scan, no codes found and the CAT , EVAP, HTR,O2S are incomplete so I need to drive it for the required cycles however the AIR, EGR, HCAT say N/A ? Is that normal or has the previous owner disabled them
Submitted: 1 year ago.
Category: Jeep
Expert:  Anthony replied 1 year ago.
Hello! Thats absolutely normal when you change a sensor. You just have to drive it more and the monitors you see not ready will get ready and be fine.

Related Jeep Questions