How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Jeep
Satisfied Customers: 33469
Experience:  34 year working in the automotive field as a Tech.
7276279
Type Your Jeep Question Here...
Ron is online now
A new question is answered every 9 seconds

Liberty sport: My jeep liberty stuck on limp mod, what i do

Customer Question

My jeep liberty stuck on limp mod, what i do to fixed the problem, I got code scanner and showed me posted me PO 882 i check all the possible course but i couldn't know what might be the problem?
Submitted: 1 year ago.
Category: Jeep
Expert:  Ron replied 1 year ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
The code P0882 can be set due to any of the following concerns, with the TIPM being the most common.
Powertrain Control Module (PCM)
Totally Integrated Power Module (TIPM)
Totally Integrated Power Module (TIPM) Wiring
Transmission Solenoid Assembly
In order to determine which has failed you are going to need to do some testing. See the test steps in the link below.
Copy and paste the link to your browser to open and view them.
https://dl.dropboxusercontent.com/u/104923897/P0882%20Jun%2017.pdf
https://dl.dropboxusercontent.com/u/104923897/P0882%20%232%20Jun%2017.pdf