How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Jeep
Satisfied Customers: 33477
Experience:  34 year working in the automotive field as a Tech.
7276279
Type Your Jeep Question Here...
Ron is online now
A new question is answered every 9 seconds

Grand Cherokee laredo: Ron, I have an 05 jeep grnd Cherokee

Customer Question

Hi Ron, I have an 05 jeep grnd
Cherokee Laredo, replacing driver side headlamp assembly, pretty basic, as your looking at the headlight how does the bottom left hand screw come out??? Had the other 2 screws and one snap button and grill off, can't access the lower left screw!! HELP PEASE!!!
Submitted: 1 year ago.
Category: Jeep
Expert:  Ron replied 1 year ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.To access all the screws on the headlamp assembly you have to remove the grill assembly as well, its help in place with push pins. See the grill steps for the lam and the grill in the links below. Copy and paste the links to your browser to open and view them.https://dl.dropboxusercontent.com/u/104923897/Grill%20assembly%20MAY%202.pdfhttps://dl.dropboxusercontent.com/u/104923897/Lamp%20assembly%20MAY%201.pdf