How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask ND-TECH Your Own Question
ND-TECH, CJDR Master Tech
Category: Jeep
Satisfied Customers: 1410
Experience:  ASE Certified CJDR Master
Type Your Jeep Question Here...
ND-TECH is online now
A new question is answered every 9 seconds

Jeep: 2006 Liberty - three dash lights on ESB/BAS traction

This answer was rated:

2006 Liberty - three dash lights on ESB/BAS traction loss indicator and ABS had gone on before but went off - now staying on. AutoZone found no codes with reader?
Well autozone's reader wont see the codes because it only scans the PCM for codes not the ABS module which is where the code are. That is why the ESP/BAS light is on. This light is on most likely due to a speed sensor failure. Either the rear one in the rear diff housing or the right or left front speed sensor. You will need someone with a full level scan tool to scan the ABS module to find which sensor it is and then replace that sensor accordingly
Customer: replied 4 years ago.
Ok would a "self read" on the odometer show the code? Why are the other lights are on with? Woud it be OK to drive?
No a self read only displays codes that are in the PCM. The ABS, BAS, and ESP light are all on because of the code in the ABS. It will be fine to drive but you ABS system will just not work properly untill the problem is corrected
ND-TECH and 3 other Jeep Specialists are ready to help you

Related Jeep Questions