How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pavlin Koev Your Own Question
Pavlin Koev
Pavlin Koev, Technician
Category: Jeep
Satisfied Customers: 3483
Experience:  17 years hands on, cars and trucks, gas and diesel
41577536
Type Your Jeep Question Here...
Pavlin Koev is online now
A new question is answered every 9 seconds

How do I replace rear brake pads on a 2008 Jeep Liberty

Resolved Question:

How do I replace rear brake pads on a 2008 Jeep Liberty?
Submitted: 6 years ago.
Category: Jeep
Expert:  Pavlin Koev replied 6 years ago.
Hi, is your car 4x4 or 2x4?
Customer: replied 6 years ago.

4 X 4

 

Thanks

Expert:  Pavlin Koev replied 6 years ago.

Attachments are only available to registered users.

Register Here


Edited by Pavlin Koev on 10/4/2010 at 12:59 AM EST
Expert:  Pavlin Koev replied 6 years ago.
Ones you have removed caliper, clean all surfaces and install new pads. Use one of the old pad in front of the caliper piston and with help of c-clamp slowly push in caliper piston. install caliper over pads and caliper screws and tight them. Install tire and tight.
Pavlin Koev and other Jeep Specialists are ready to help you