How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Randall C Your Own Question
Randall C
Randall C, ASE Master Tech
Category: Jeep
Satisfied Customers: 12803
Experience:  ASE Master Tech, L1, Jeep owner, Shop owner
13677702
Type Your Jeep Question Here...
Randall C is online now
A new question is answered every 9 seconds

How to replace the pickup coil on a 89 Jeep Cherokee

Resolved Question:

How to replace the pickup coil on a 89 Jeep Cherokee
Submitted: 6 years ago.
Category: Jeep
Expert:  Randall C replied 6 years ago.
hello, you must first remove dist. then you will see a collar with a pin though the middle. You have to drive the pin out with a punch. Slide collar off shaft. then e the shaft will pull out the top of dist. the pickup will be right there to change. reverse to install. Be sure you mark the dist as to where rotor is pointing before you pull dist so easier to get back in time



graphic pull dist so easier to get back in time

Randall C and 3 other Jeep Specialists are ready to help you